Prosthesis User

This randomized controlled clinical trial evaluates the clinical performance of 3D-printed resin restorations compared with milled monolithic zirconia in implant-supported single crowns and short-span fixed partial dentures (FPDs). A total of patients requiring one or two implant-supported restorations in the mandibular anterior region were randomly allocated to receive either 3D-printed permanent resin restorations (CROWNTEC) or conventionally milled zirconia prostheses. All restorations were fabricated using a standardized digital workflow and assessed over a 12-month follow-up period. The primary outcome was restoration survival rate, while secondary outcomes included technical complications, peri-implant biological parameters, marginal bone level changes, and patient-reported satisfaction. This study aims to provide clinical evidence regarding the viability of 3D-printed definitive resin materials as an alternative to zirconia in implant prosthodontics.

The present study try to evaluate the effectivenness of an early intervention program based on multimodal physiotherapy and focused on therapeutic exercise to improve the results of patients with a reverse shoulder phrostesis. This trial will be a randomized controlled trial with parallel groups, and outcomes variables will include psychometric properties through the use of specific questionnaries, and laboratory variables such as strength with a dynamometer, range of movement with a goniometer, muscle mass with an ultrasound, and kinematic parameters with inertial sensors. This study aims to develop an original intervention program in order to try to establish new protocols in the management of these patients.

Our sense of touch is essential to explore our environment and experience life and is based on signals from receptors in the body that are sensitive to different types of stimulation. The TACTHUM projects aims to investigate the fundamental firing of mechanoreceptors in the body to various external stimuli, with an end-aim to better understand the human somatosensory system and to apply this knowledge to provide comprehensive sensory feedback in prosthetics. We have a vast system of peripheral receptors in the skin and muscles that provide us with exquisitely detailed information about our everyday interactions. When there is injury to a body part, such as in amputation, there is a significant loss of somatosensory input. Prosthetic devices have greatly developmed in the past few years, especially with the introduction of useful sensory feedback. However, there is a lot to discover both about the workings of the somatosensory system and how to recreate this to give feedback in a prosthetic device. The main objective of the TACTHUM project is to understand how to recover and apply useful somatosensory feedback in prostheses for amputees. There are a number of other sub-objectives, to: 1. Determine how tactile mechanoreceptors encode the texture of natural surfaces during passive and active exploration. 2. Investigate how our sense of touch varies with emotional state. 3. Explore what happens to our sense of touch when we explore surfaces at different temperatures. 4. Understand the origin of our perception of humidity. 5. Investigate differences in the encoding of tactile information with age. 6. Determine the perceptions generated by the stimulation of single tactile afferents. 7. Study changes in spontaneous activity and responses to tactile stimulation on the residual limb of amputees. To accomplish these objectives, we will primarily use the technique of microneurography, in vivo recordings from peripheral nerves, to gain direct information about the firing of peripheral neurons in humans. In conjunction with this, we will use a variety of mechanical and thermal stimuli to excite somatosensory fibers and register the activity of other physiological and perceptual measures. This will allow us to gain a fuller understanding of how the incoming somatosensory signals are interpreted and processed. Overall, we aim to explore how more naturalistic tactile interactions are encoded and how these can be translated to provide realistic prosthetic feedback.

Most of the limb amputation related to vascular disease is often secondary to a diagnosis of type 2 diabetes mellitus. The amputation involves significant motor, psychological, and social challenges for patients, with a major effect on their psycho-physical health. The psychological processes that characterize this clinical population are still poorly investigated. Adopting a biopsychosocial approach, the present randomized prospective quali-quantitative study protocol aims to evaluate the behavioural and psychological adaptation at various stages of the disease: risk of amputation, lower limb amputation, and prosthesis use. In the last phase, patients with prosthesis will receive traditional rehabilitation treatment and technology-based rehabilitation (experimental) or not (active comparator) with randomized controlled enrolment. The evaluation will be based on a semi-structured interview, specific to the disease stage and constructed using the Three Factor Model, and rating scales. Patient's medical history, functional status (ie, motor functionality, autonomy in BIM and FIM, risk of falls, subjective perceived pain), and psychological aspects (ie, emotional impact, HRQoL, anxiety and depression symptoms, personality traits, acceptance, adherence, body image, the experience of the prosthesis and technology-based rehabilitation, expectations for the future) will be investigated. The audio-recorded and transcribed interviews will be analyzed using the Interpretive Description approach.

The goal of this study is to find out if using microprocessor-controlled prosthetic knees (MPKs), prosthetic knees with a built-in computer, improves health outcomes related to falls in adults who use above-knee prostheses. The main questions are: * Do individuals with MPKs have fewer fall-related health issues compared to those with non-microprocessor-controlled prosthetic knees (nMPKs)? * Do individuals with MPKs have increased mobility, faster walking speed, and improved quality of life compared to those with nMPKs? Participants who have recently received an nMPK as part of their regular care can join the study. Those randomized to the control group will keep using their nMPK, while those randomized to the intervention group will receive a stance-and-swing MPK or a stance-only MPK.

The purpose of this study is to evaluate the motor imagery ability in transradial amputees using myoelectric prosthesis, compare it with the control group and investigate its effect on functionality and proprioception.

The rationale for this study is to conduct a take-home clinical trial to evaluate the impact of the bimodal Caesar foot in a real-world environment. Participants will take the device home and use it throughout their daily life for two months. A one-month baseline period, using their usual foot, will be completed both before and after the two-month period with the Caesar foot condition. Self-report surveys and performance-based measures will be collected in the clinic at the end of each condition. The intent of this study is to determine the Caesar foot's feasibility in a real-world environment. Data will be collected to understand impact to the user's daily life and physical activity through outcomes and participant feedback. The feedback obtained during this study will be essential to informing the design intended for commercialization.

The goal of this clinical trial is to systematically evaluate whether or not two commonly held fundamental assumptions for pattern recognition control translates to functional performance when tested on individuals aged 18 years or older with upper limb absence at the transradial level while wearing a physical prosthesis. The specific aims of this study are: 1. To evaluate the effect of changing untargeted myoelectric channel count on the functional performance of transradial prosthesis users wearing a fully functional prosthesis via functional outcomes measures such as the Box and Blocks test. 2. To evaluate the effect of changing myoelectric channel targeting of a fixed number of myoelectric channels on the functional performance of transradial prosthesis users wearing a fully functional prosthesis via functional outcomes measures such as the Box and Blocks test. Researchers will perform a randomized crossover study to compare system configurations with different number of sensor channels and with various strategies for sensor placement on the limb. Participants will be assigned to a random test sequence that includes the following four different EMG channel conditions: Condition A: 4 untargeted channels Condition B: 8 untargeted channels Condition C: Up to 16 untargeted channels Condition D: 8 targeted channels Researchers will evaluate the effects of changing myoelectric channel counts on the functional prosthesis performance of individuals with transradial limb loss via functional outcome measures. Participants will: * Attend up to 5 in-lab sessions that are expected to last 4 hours. * Conduct site visits every 1-2 weeks to complete functional and self reported outcome measures with each condition. * Play virtual games with the Coapt Cuff for 15 minutes a day, 3 days a week in between visits.

The goal of this proposed project is to gather community-based data from the K2-level Transfemoral Amputee (TFA) population to aid in evidence-based prescription of powered prosthetic knees (i.e., choosing the right device to maximize the benefit for each patient). The investigators intend to use this trial data along with a concurrent study being conducted within the K3-K4 level population to guide the implementation of effective prescriptions towards those that can benefit most from a given device and limit prescription to those who would not see benefit in order to ensure the most judicious use of Department of Defense (DoD) and Veteran's Affairs healthcare dollars. The findings will also be shared with the research community to help drive the design of future devices by identifying what features and functions are most beneficial to which patient populations when the devices are used outside of the laboratory. In summary, more community-based data on how powered prosthetic knees compare with the current standard in TFA populations is needed to allow for improved clinical decision making and clinical outcomes.

The goal is to understand the critical factors associated with outcome acceptance following upper limb loss. The investigators aim to develop a unified theoretical model that describes the psychosocial experience of upper limb prosthesis use and predicts outcome acceptance following upper limb loss. The investigators will also examine experiences with prosthesis education, selection, and training as well as how psychological and social issues impact prosthesis use. In addition, the investigators will use the findings to develop a prototype decision tool to assist with matching persons to prostheses. Study findings will help providers, technology developers, and researchers better understand the complex experience of upper limb prosthesis use. This conceptual framework will enable clinicians and researchers to evaluate and predict patient outcomes following limb loss, and to design interventions that improve outcomes. The proposed study is a mixed methods (qualitative and quantitative) study using an observational design. The qualitative component of the study will involve data collection through telephone interviews with 42 participants and analyses using a grounded theory approach with constant comparison methods. The quantitative component involves administration of standardized measures quantifying constructs of the theoretical model in 120 participants and analyses to produce a structural equation model of outcome acceptance. Participants will include persons with unilateral acquired upper limb loss at the trans radial or trans humeral level who use currently available prosthetic devices. Up to 16 individuals will participate in a series of focus groups that will be conducted to provide feedback on the model generated from previous data.

The goal of this observational study is to evaluate the impact of a full arch implant-supported prostheses in the lip support. In a complex rehabilitation cases, the process between the diagnosis and the delivery of a prostheses may lead with many clinical and laboratorial choices which influence the final design of the prosthetic work and consequently the facial profile of the patient. The use of 3D facial scanners and advanced superimposition methodology allows the investigators to objectively measure several relevant parameters such as vertical occlusion of dimension and lip support.